Tying Instructions: Lite Brite Minnow

1. Wrap .020 lead wire about ten times at the 3/4 position of the hook shank. Secure with thread wraps and head cement.
Step One
2. Attach a marabou tail with the length not to exceed the hook shank. Wrap the butts of the marabou up the hook shank to secure and build an underbody.
Step Two
3. From the tail tie in position , dub an increasing body of Lite Brite towards the eye. Secure just behind the eye and Whip Finish.
Step Three
4. Attach the eyes and coat the eyes with some clear Nail Finisher to help secure them.
Step Four

©2005 Steve Schalla
This page is not to be copied without my explicit permission.