Hale Bopp Leech – with a distinct red thread collar

Bead Head Olive Hale Bopp

Show

Tying Instructions

Tying Instructions: Hale Bopp

1. Attach bead. Note how the bead sits askew on the shank. The next step is to wrap a small piece of leadfree wire and shove it into the cavity to fill the void of the bead and let the bead be centered on the shank.

2. Wrap leadfree wire behind the bead. 3-4 Wraps of 0.015 leadfree wire will fit within the bead. The leadfree wire will be snugged into the drilled opening of the bead to help secure it and add weight.

3. Attach the thread onto the shank behind the wire and secure the wire wraps with thread wraps that butt up against it.

4. Wrap the thread back along the shank to the tail tie-in position at the bend of the hook. Note that the tail tie-in position is where the thread hangs halfway between the barb and point of the hook.

5. Cut about 15-20 marabou fibers from a marabou stem. Try to keep the fiber ends somewhat even. This is not critical, however, since uneven fibers produce a nicely, tapered tail that provides good action. Attach the fibers to the shank with the tail being about 30% longer than the shank length. The Hale Bopp has a longer and more slender tail than a Seal Bugger or a Mohair Leech. Note that there is no Krystalflash or Flashabou added to the tail. Simplicity a a hallmark of this pattern.

6. Secure the butt ends of the marabou with thread wraps up the shank to just behind the bead. Trim off the unsecured butt ends behind the bead and secure with more wraps of thread. Wrap the thread back to the tail tie-in position.

7. Create a dubbing loop by making a large loop with the thread. The loop is anchored to the tail tie-in position with thread wraps overlapping the loop. After creating the loop, wrap the thread back to just behind the bead. A Dubbing Loop tool keeps the loop open so you can place dubbing within the loop.

8. Place the loose dubbing within the open loop. The tension of the dubbing and the thread will keep it in place. If it freely drops out, either increase the amount of dubbing or pull on the dubbing tool to reduce the space within the loop.

9. Twist the loop to trap the dubbing fibers within the loop. This creates a chenille. You can use your fingers to massage the fibers within the loop for density and fiber placement. Once you are satisfied with the placement of the fibers a few extra turns of the loop will lock the fibers into position. Do not tighten the loop too much as you want to have plenty of fibers extending from the thread core.

10. Wrap the chenille forward around the shank having the chenille touch the previous wrap. Do not wrap over the previous wrap. I use hackle pliers to control the chenille and keep the loop together. Don’t worry if you do not have enough chenille to complete the body, you can always make another loop.

11. I got only halfway with my first application of dubbing, so I will make a second thread loop and repeat the procedure. First, I secure the first chenille with the thread from my bobbin and trim off the excess. Then, I make a second loop and wrap the bobbin thread up to the bead.

12. Dubbing is added to the loop.

13. The loop is twisted to produce a chenille. Again, use your finger to manipulate the fibers within your dubbing loop.

14. Wrap the chenille forward with the last wrap just behind the bead. Secure the chenille with thread wraps from your bobbin.

15. Whip Finish and clip your thread off the fly.

16. Attach a red thread just behing the bead. This will be a flared gill attractor element to the pattern.

17. Wrap the red thread behind the bead until you get the thickness or appearance you prefer. Whip Finish to secure the wraps.

18. Use a piece of Velcro to grab the fibers from the thread core and extend the fibers out from the shank.

19. Take a dubbing brush and comb out the fibers. This will give you a better appearance as well as a visual indication of the length and placement of the fibers. You can trim some of the extra long fibers to suit.

20. The Finished Fly.

Materials to Order Material, click the link
Hook	TMC 200R #8-12
Thread	Danville Olive 6/0
Head	Gold Tungsten Bead
Body	Olive Angora Goat
Tail	Olive Marabou
Collar	Uni Thread Red 8/0

Derek Fergus

Hale Bopp Leech

TheHale Bopp Leechwas designed by Derek Fergus and Mark Knoch in the summer of 1995 at Oregon’s Davis Lake. They tied the pattern at night while camping on the lake as the Hale Bopp comet was overhead, thus the name. It is basically the same pattern as the Mohair Leech.

Red Thread Collar

They arrived at this pattern in a somewhat different direction as they modified Rickard’s Seal Bugger by eliminating the palmered hackle and the ribbing. They utilized a Gold Bead for the head but this is optional. A Red thread gill segment placed behind the bead or a Red thread head is distinctive of the Hale Bopp. The tail is similar to the Seal Bugger by being sparse and wispy but is a little longer by about 30%.

The Hale Bopp is marketed by both Solitude and Spirit River and has become the prevalent Angora Leech variation used within our Western waters. An Angora Goat blend with some synthetic fibers was formulated by Derek and marketed by Spirit River called “On the Take” dubbing. This was the dubbing blend specified for the Hale Bopp Leech. It is no longer available from Spirit River.

Diversity of Colors

The Hale Bopp that are marketed today lack the diversity of Angora colorations and would not be considered a Mohair leech variation any longer. They are commercially tied with specific dyed colors of the Angora Goat dubbing. However, the attributes of a wispy Angora body and long marabou tail continue to give this pattern an edge as a preferred leech pattern. The Olive-bodied Hale Bopp Leech is a good representation of the Perch Fry on Crowley Lake.

Gray Hale Bopp

Hook	TMC 200R #8-12
Thread	Danville Gray 6/0
Head	Gold Tungsten Bead
Body	Dun Angora Goat
Tail	Gray Marabou
Collar	Uni Thread Red 8/0

Black Hale Bopp

Hook	TMC 200R #8-12
Thread	Danville Black 6/0
Head	Gold Tungsten Bead
Body	Black Angora Goat
Tail	Black Marabou
Collar	Uni Thread Red 8/0

Wine Hale Bopp

Hook	TMC 200R #8-12
Thread	Danville Wine 6/0
Head	Gold Tungsten Bead
Body	Claret Angora Goat
Tail	Claret Marabou
Collar	Uni Thread Red 8/0

Brown Hale Bopp

Hook	TMC 200R #8-12
Thread	Danville Brown 6/0
Head	Gold Tungsten Bead
Body	Fiery Brown Angora Goat
Tail	Brown Marabou
Collar	Uni Thread Red 8/0